Emerald Energy All-In-One Pro 270L (EE-HWS-A1-270) - NZ

R290 270 L Integral all-in-one
Emerald Energy All-In-One Pro 270L (EE-HWS-A1-270) - NZ

AS/NZS 4234 energy savings (AU equivalent)

83%

vs the standard's reference electric storage water heater, VEU Zone 4, based on the AU-registered performance of the Emerald Energy All-In-One Pro 270L (EE-HWS-A1-270) (same brand and model code EE-HWS-A1-270, distributed into NZ by Ecobulb) — not tested against AS/NZS 4234 as a NZ product itself.

Specifications

Type Integral all-in-one
Refrigerant R290
Tank volume 270 L
Tank material Enamel, 2.5mm tank wall, 3.0mm dome
Rated heating capacity 2.8 kW
Rated power input 0.58 kW
COP 4.8 (Standard mode, test condition ambient 20/15 degrees C, water 15-55 degrees C (AU test data for the identical unit))
Sound level 49 dB(A)
Hot water delivery 60 °C
Operating ambient -7 to 43 °C
Tank height 1826 mm
Heat pump weight 132 kg
Electric backup None (heat pump only)

Certified to

AS/NZS 4234

Specs from: Ecobulb New Zealand product page (ecobulb.co.nz/heat-pump-water-heaters); specs cross-referenced from the identical Emerald Energy All-In-One Pro AU data sheet. Official product page →

Sold in New Zealand

NZ has no equivalent to the Australian STC/VEEC/ESC certificate schemes, so no dollar rebate applies to this model. Its confirmed AU-market equivalent is registered and shown above.

The Emerald Energy EE-HWS-A1-270 is distributed into New Zealand by Ecobulb, working with a network of plumbing and electrical installation partners, under the “Emerald” / “Emerald Pro” name - the same brand and model as the AU-market product, used by 70,000-plus homes across Australasia. A Hitachi-joint-venture DC inverter compressor, DC inverter fan, and microchannel heat exchanger are built into the same cabinet as the 270 L tank.

This variant has no electric heating element, so it runs in Standard, Silent, or Booster mode on the heat pump alone. Standard mode delivers 2.8 kW of heating at a 0.58 kW power input (COP 4.8), and Silent mode drops to 2.0 kW at 0.44 kW input (COP 4.6, 45 dB(A) at 1 m) for quieter running. Without the electric element fitted, the working ambient range is -7 to 43 degrees C.

Ecobulb’s own NZ product page does not publish a separate spec sheet; the figures above are the AU data sheet values for the identical model code.

Homeowners

What's it worth at your place?

Enter your postcode to see the exact certificates and dollar rebate this model earns at your address.

Check your rebate →

Installers & retailers

Quoting this product?

Compare it against alternatives, or talk to us about eligibility, zoning and claim paperwork.

Compare models →

Manufacturers & importers

Your product?

Verify or update this listing, or ask about registering new models and maximising certificate outcomes.

Contact EnergyAE →

New to the schemes? Read how STCs, VEECs and ESCs work for residential HPWHs, or see the HPWH Intelligence Platform for live compliance and certificate tools.