Theodoor 230L (X7-230L-A)

230 L Integral all-in-one
Theodoor 230L (X7-230L-A)

Rebates up to

$640

STC $640

Replace-electric, medium household, best zone. Federal STCs plus the better of VIC (VEECs) or NSW (ESCs). Enter your postcode below for exact figures.

Register data as at CER (STC) 2026-04-30

Specifications

Type Integral all-in-one
Tank volume 230 L
Operating ambient -15 to 43 °C

Certified to

AS/NZS 4234SAAWaterMark

Specs from: Theodoor product pages (theodoor-air.com); public CER SRES register.

Certificate rebate by postcode

Enter your postcode to see the certificates and rebate for this model.

Registered certificate values

Every scheme this model is registered for, by zone. STCs at $40, VEECs at $85, ESCs at $30 (reference prices as at 2026-07-07). Claim year 2026, medium household.

SRES — STCs (national)

Zone 1 13 STCs $520
Zone 2 13 STCs $520
Sydney (Z3) 15 STCs $600
Melbourne (Z4) 16 STCs $640
Canberra (Z5) 16 STCs $640

VEU — VEECs (Victoria)

Not yet registered for VEECs.

ESS — ESCs (NSW)

Not yet registered for ESCs.

Certificate counts are computed from the model's registered performance data using the current regulated equations. A lodged claim depends on the specific installation, household size, and the scheme rules in force at creation. Energy savings % is against the AS/NZS 4234:2021 reference electric storage water heater for that zone and load size, calculated from the model's registered performance data, or taken directly from the register where it publishes a savings figure. VEU registers this data at the small load (the step-down load for a medium-rated system) and ESS at the medium load, so the two schemes' figures differ for the same zone.

The Theodoor X7-230L is an all-in-one heat pump water heater with a built-in micro-channel heat exchanger, so the refrigerant cycle heats the tank directly rather than through a separate water loop. Theodoor is a Guangzhou-based manufacturer (GZ Theodoor Tech Co., Ltd.), and the X7 is marketed as its Australian-standard model, rated for ambient operating temperatures from -15 to 43 degrees C.

The unit carries SAA and WaterMark certification and is presented against AS/NZS 4234 water heater performance evaluation, and is marketed as compliant with the Small-scale Renewable Energy Scheme. Control is via an LED display with AUTO, ECO, and fast-heating (HEATER) modes.

The same physical 230 L product is registered under several model-code suffixes (A, M2, M3, M5), most likely covering colour, tank-material, or minor build variants of the same heat pump and tank. Theodoor has not published a detailed public datasheet giving kW capacity, power input, COP, dimensions, or weight for this model; those fields are omitted here pending a manufacturer spec sheet.

Registered model codes

X7-230L-A, X7-230L-M2, X7-230L-M3, X7-230L-M5

Homeowners

What's it worth at your place?

Enter your postcode to see the exact certificates and dollar rebate this model earns at your address.

Check your rebate →

Installers & retailers

Quoting this product?

Compare it against alternatives, or talk to us about eligibility, zoning and claim paperwork.

Compare models →

Manufacturers & importers

Your product?

Verify or update this listing, or ask about registering new models and maximising certificate outcomes.

Contact EnergyAE →

New to the schemes? Read how STCs, VEECs and ESCs work for residential HPWHs, or see the Certified Launch Platform for live compliance and certificate tools.